naxtrust.blogg.se - Cardiohelp maquet

No procedure can be performed on a patient on ECMO without the consent of the ICU consultant.

ECMO plugged into blue power point Hand crank near by Secure oxygen flow to oxygenator Check flow settings Check Pump access line for chattering Patient must not be left unattended at any time.

It is the responsibility of the cannulation physician to ensure all cannulae are appropriately positioned and secured, equipment is set up and secured up appropriately, flows are optimized and anticoagulation orders completed prior to leaving the patient. This should be performed by the cannulation team once the lines are secure, prior to leaving the patient. Flow censoring zero should be performed 30-60min after initiation of ECLS this requires transient cessation of circuit flow.

The flow sensor should be appropriately coated with ultrasound paste and once in the pump head covered with Glad-Wrap. The oxygenator is positioned in the oxygenator arm.

The pump head is kept with outlet at “6 o clock” to limit bubble transfer.

Maquet has updated its current CARDIOHELP-i software to version 3.3.2.0 and this will be installed by an authorised Maquet service technician. Maquet is providing work around instructions to prevent risk of injury to the patient in the unlikely event of the failure mode occurring during use. All manual settings are lost and the system will revert back to the original clinical settings.Ģ - Through internal testing, it has been determined that there is a possibility that electromagnetic interference due to electric current fluctuations may cause pressure valves on the display to "freeze". Serial Number: All devices up to 90410628 excluding S/N 9041060626ġ - There have been reported cases of brief unexpected shutdown, followed by an automatic device restart of the human machine interface (touchscreen) of the CARDIOHELP device. CARDIOHELP-1, software version 3.3.0 (Heart-lung bypass system)